My favorite is my Bosh wall oven that uses 85C rated capacitors with practically no voltage derating for the control board that sits directly at the top of the oven. After 4 years, they gave out causing the display to dim to the point of invisibility.
We’re talking about 50 cents of part savings on a $3000+ appliance here.
Replaced them myself easily, but most people will end up having to call for service and end up replacing the entire board for hundreds of dollars minimum.
Capacitive touch buttons are #1 on my hate list for "inventions". They have all the downsides of touchscreens with none of the upsides, and they're imitating a control device so perfect that it basically hasn't been changed since its invention (the button).
Agreed - I hate captouch buttons, and would rather have physical controls every time. But in case you're curious why they're so common:
1. They're cheaper than mechanical buttons.
2. They're more space-efficient inside of the product.
3. They are easy to waterproof.
4. They have no wear-out mechanism.
Thanks, I intuited (1) and (2) but I hadn't thought about (3) or (4). I think waterproof mechanisms are about the only time I've encountered them where I haven't immediately despised them for total lack of haptic feedback and lag time between button input and device function--although that probably has more to do with poor system design rather than the limits of the captouch button technology.
My guess is that I associate them with lag because any control interface that cut corners on buttons probably cut corners on everything else, too.
Sidetrack, maybe a silly question: Under what circumstances are you touching your dishwasher with wet fingers? Plates are dry when they go in and dry when they come out if you have a decent dishwasher.
Capacitive buttons suck, but they are no worse in dishwashers than in any other appliance, in my usage at least
We’re talking about 50 cents of part savings on a $3000+ appliance here.
Replaced them myself easily, but most people will end up having to call for service and end up replacing the entire board for hundreds of dollars minimum.